If you’re looking for a vacuum cleaner that has been manufactured in Europe, then there are a few more options compared with just the UK.. For example,.
Step 3: Cut Away Tangled Hair Or Carpet Fibres.Now it’s time to cut away hair and other fibres that have become caught around the brush bar.. Slide the scissors along the groove in the brush bar, as this makes it easier to get the scissors underneath the fibres.
Be careful not to cut any of the bristles on the brush, as this could affect performance.. Vax doesn’t recommend using water to clean the brush bar.Instead, just cut caught fibres and use a dry cloth to remove debris build-up..Step 4: Wipe The Floorhead Interior.
With the brush bar removed, this is a good time to clean inside the floorhead itself.Use a soft, dry cloth to wipe down the inside to remove any loose debris.
Do not use water for this.. You should also check the air outlet in the floorhead for any blockages or clogging.
Even a partial blockage here will reduce airflow, leading to reduced suction power..Make sure you place the screws in a safe place, as you’ll need them later.. Once each of the screws has been removed, the V10 battery should slide out of the bottom of the vacuum’s handle.
Ensure you follow your local laws when disposing of the old battery..Tip: The two bottom screws are designed to be at an angle.
Keep this in mind when replacing them during the next step..Step 4: Attach And Secure The New Battery.